Duplex Milling Machine – Economy Version

We have developed an economical duplex milling machine which is very affordable and is a no frills attached machine. A brief description of this machine is given below:

Features and Specs:

  • Base made of square section, with adequate ribbing to provide more than sufficient rigidity with light weight. .
  • Atop the base, a slide is mounted in the middle.
  • The slide is made of LM guides and leadscrew with a stroke of 700 mm to cut 330 mm of width.
  • The slide is run by AC induction motor connected to worm reduction gear box which inturn will be coupled to ballscrew.
  • The AC induction motor is coupled to a VFD to obtain stepless feed from 100mm/min to 2800 mm/min for rapid return.
  • On the slide a fixture is mounted with manual toggle clamps.
  • Two milling heads are mounted on either side of the slide.
  • The milling heads are run by a 1.5 HP AC induction motor coupled to the spindle through timer belt and pulley.
  • The milling head is provided with ISO-40 spindle taper capable of holding Ø63mm cutter.
  • The milling heads are provided with all cast iron cross axis manual depth of cut setting, of 50 mm.
  • The machine will be run through a relay based auto-cycle sequence.
  • The sliding surfaces with be lubricated by a centralized lubrication with timer.

Sequence of operation:

  • Load the component and clamp using manual toggle clamps.
  • Press auto-cycle button.
  • The component gets feed against the cutters, after stroke ends, the component returns in rapid and stops.
  • Unload the component

Video:

Contact us for product information

    Your Name (required)

    Your Email (required)

    Subject

    Your Message (required)

    Enter the Captcha (Case-Sensitive)

    captcha

    Contact Details