flange کے ملر
RADIAL ARM MILL, DRILL CENTER
Huge flanges, trammels etc need their end flanges to be machined, after welding, for a good flatness and parallelism, so as to avoid the possibilities of leakage from the gaskets. Single point cutting by a flange facer is not only time consuming, but also it needs a separate machine for drilling the pitch drill holes. Conventionally, this is done by laborious, manual blue-matching, using hand grinders. Conventional flange facers, cannot do the drilling operation. A single flange facer cannot face all the sizes of flanges upto diameter 6.5 meters or even above. Radial Arm Mill, Drill Centre, also called Flange Miller, can radially mill on the diametrical surfaces of dia 6.5 meters flanges and can produce close pitch drills, effortlessly and in considerably less time.
تعمیر & نمایاں
- Though popularly named “Flange Miller”, more aptly called “Radial Arm Mill, Drill Center”
- Flange Miller consists of a Central Post, on which a rotary drive unit is located.
- Cross axis arm & counter balancing arm are located on the sides of the rotary housing.
- Cross traverse mechanism in the arm to position the milling head to the varying diameters of the flanges.
- 20 HP milling head is mounted on a vertical slide unit for setting the depth of cut.
- Different sizes of detachable center blocks to suit to the varying lengths/heights of the flanges.
- Central rotary drive unit of the radial arm mill, drill center consists of extra heavy duty, preloaded pairs of taper roller bearings or slew bearings.
- Common VFD controlled cross feed traverse and vertical feed traverse.
- Rotary drive through a AC servo motor for repeatedly accurate pitch selection in drilling, after radial milling through HMI (Human Machine Interface).
- A unique, self-adjusting, self-compensating counter balancing mechanism for continuous balancing for the moving ram.
- While the rotary drive bearings are lubricated for life, the other rotating and sliding surfaces are continuously lubricated at regular intervals by an automatic or manual lubrication system.
- It is possible to use the same machine for radially grinding the top flange as well by mounting a cup wheel grinding attachment on the opposite, counter balancing ram, which is meant for counter balancing milling ram.
Video :-
مصنوعات کی معلومات کے لئے ہم سے رابطہ کریں
رابطے کی تفصیلات
- +91-80-28361767
- info@shenoyengineering.com
- +91-80-28361725
مصنوعات
- فورم کے اوزار & کٹر
- گھسائی کرنے والی تخصص
- پلیٹ ایج کی گھسائی کرنے والی, اریب جنس مشین پلیٹ
- H BEAM, I BEAM MILLING, DRILLING & TAPPING MACHINE
- ہوائی جہاز ملر, ڈوپلیکس, فلور قسم
- ملاپ کے ساتھ مل کر سرنگ کا سامنا کرنا پڑتا ہے
- ملٹی زاویہ یونیورسل کی گھسائی کرنے والی منسلکہ
- صحیح زاویہ کی گھسائی کرنے والی کے ساتھ منسلک
- تبدیل ہوائی جہاز پیسنے والے کارخانے
- تبادلوں کٹ Planomilling
- سپیشل مقصد کی ہوائی جہاز ملر
- رام کی قسم کی گھسائی کرنے والی & بورنگ ہیڈ
- گھسائی کرنے والی Retrofits
- 3 سپیشل مقصد کی گھسائی کرنے والی مشین محور
- Mutli ہیڈ کی گھسائی کرنے والی SPM
- گھسائی کرنے والی سربراہان اور ملنگ ہیڈ ملحقات
- سپیشل مقصد کی مشین
- دھات کاٹنے SPM
- سپیشل مقصد کی مشین
- 8 Station Rotary table based Drilling and Chamfering SPM
- چوکور ہیڈ ملنگ ایس پی ایم
- دو اسٹیشن چار اسپنڈل ٹرننگ ایس پی ایم
- CNC 3 چار تکلا پروفائل گھسائی کرنے SPM محور
- ٹیپر ملنگ ایس پی ایم
- ٹرپل تکلا ٹیپنگ ایس پی ایم
- یو ڈرلنگ اور بورنگ SPM
- Drilling, چیمفرنگ اور ڈیبورنگ ایس پی ایم
- Con Rod Taper Milling SPM
- Con Rod Small End Bore Chamfering SPM
- Rotary In-Gate Milling SPM
- 3 Axes, CNC, ID Trepanning, OD Turning & End Threading SPM
- Table Top Drilling Machine with Servo Positioning
- Double Head Slot Milling & Notch Milling SPM
- Double Head Slot Milling & Drilling SPM
- ڈپلیکس گھسائی کرنے والی مشین - معیشت ورژن,,en,روٹری ان گیٹ کی گھسائی کرنے والی SPM,,en,AXES,,en,CNC پورٹیبل ملنگ,,en,شیڈنگ مشین,,en,ڈپلیکس کی گھسائی کرنے والی اور سپلائی SPM,,en,اوپر مشین کے کام کی ویڈیو,,en
- 2 محور CNC Mutli اثر Taper ٹرننگ SPM
- Twin Station 8 Axes CNC Controlled Rough Turning SPM
- Quadruple Head Slot Milling & Slitting SPM
- ڈوپلیکس چھلانگ لگانے SPM سامنا
- H BEAM, I BEAM MILLING, DRILLING & TAPPING MACHINE
- Rotary Coordinate Drilling SPM
- گن سوراخ کرنے والی مشین
- CNC BORING MILL- VMC, HMC and VTL rolled into one
- سپر تکمیل خصوصی مقاصد کے لئے مشین
- سپیشل مقصد کی مشین Buffing
- تعمیر SPM
- دھات کاٹنے SPM
- Insitu تخصص
- پورٹ ایبل CNC مل
- میں سوستانی flange کے Facer, پورٹ ایبل ریڈیل Planer کی & نیم Insitu حل
- 3 AXES, CNC PORTABLE MILLING & THREADING MACHINE
- پورٹ ایبل 2 محور CNC پہیا تبدیل خراد
- ASTHRA – Hand driven flange facer
- نیم Insitu کے مسائل کے حل
- چوک flange کے میں سوستانی ملر
- flange کے ملر
- لائن بورنگ خصوصی مقاصد کے لئے مشین
- CNC کی مشینیں
- بجٹ عمودی مشینی مرکز
- 3 محور CNC کی گھسائی کرنے والی مشین
- 3 Axes, CNC, ID Trepanning, OD Turning & End Threading SPM
- CNC Double Column Milling Machine
- CNC 3 چار تکلا پروفائل گھسائی کرنے SPM محور
- پورٹ ایبل 2 محور CNC پہیا تبدیل خراد
- 3 Axes Horizontal CNC machine
- Twin Station 8 Axes CNC Controlled Rough Turning SPM
- 2 محور CNC Mutli اثر Taper ٹرننگ SPM
- CNC کی ہوائی جہاز پیسنے والے کارخانے
- CNC کی سپیشل مقصد کی ویلڈنگ مشین
- Fixtures for VMC and HMC
- آئٹم کے ساتھ منسلک
- خدمات
میں ترجمہ :-
ترجمہ میں ترمیم کریں