フランジ製造業が直面している関係, ODターニング, 退屈な, 穴をボルト締めするための掘削をピッチに加えて. 代わりにこれらの異なる加工操作に別のマシンにフランジをシフト, 私たちは、SPMのコンセプトを開発しました, 単一の設定でこれらのすべての操作を行うことができ.

FEATURES:

•重リブベース, on which a rotary table is mounted.
• Servo driven Rotary table to accommodate the circular job holding fixture.
• 2 vertical columns, bolted to the base in the bottom & adjoined in the top through a cross beam, having integral cross axis.
• 2 vertical, ram type, self-powered unit heads mounted on the cross rail – LH head for single point facing, turning & 退屈な; RH head for drilling (if need be, even milling).
• Machine can be offered with single ram type head, if single point cutting facing is not required.
• VFD controlled AC motors for cross & vertical axes for LH head (single point cutting); servo drive for RH head for accurate pitch selection while drilling.
• Servo driven motor for stepless rotary motion of the rotary table & accurate pitch selection while drilling.
• For more information on Ram type unit heads, ここをクリック
操作:

Clamp the flange on the rotary table & press “auto-cycle button”. While the rotary table starts rotating, single point cutting like facing, 退屈な, turning etc are finished in the first round. After finishing the single point cutting, while LH head retracts to home position, the RH head takes position for coordinate drilling on the flange. Combination of PLC, limit switches, encoder feedback etc ensures an efficient auto-cycle. HMI (human machine interface) facilitates user-friendly program selection and modification. Combination of turcite lining & case hardened guideways strips on linear axes, auto-lubrication, copious coolant delivery, optionally offered guideway protection, automatic chip disposal etc are other features of the machine.