Цоунтерборе Алат
Counterbore Tools
Custom Manufactured to suite to your requirement.
Бројач отвора алата нуде предности Тхроваваи индексних способне карбида уметака. Counter bore tools are offered in any size with single, double or triple cutting edges based on the size. Слободно се користе слободне стандардне карбид инсерти. Пилоти су Одвојиви типови, који дозвољава употребу различитих пречника пилота за исти ДИА контра отвора. Ова функција такође омогућава лако замену оштећених / дотрајалих пилота. Да би се олакшало лако проток чип, добро дизајниране гасхес и рељеф су обезбеђена на дршком алата.
КАРАКТЕРИСТИКЕ & СПЕЦС:
- Custom manufactured as per your requirement. Mention the required hole and counter-bore diameter and we will manufacture it for you.
- Offered with tapered or straight shank.
- Standard ISO grade indexable carbide carbide inserts used. Replacement inserts can be bought from a local tool shop.
- Double or triple cutting edges provided so that feed per tooth can be increased for better speed and finish.
- Guide pilots used to guide the tool and provide sufficient rigidity while cutting.
- Guide pilots result in better concentricity.
- Guide pilots are detachable type. You can use one counterbore tool for multiple holes by changing the guide pilot.
- Detachable guide pilots can be easily replaced after getting worn out.
- Engineered relief, typical to flutes of a drill provided for chips to flow out.
- Manufacturing lead time of maximum 20 days.
- Shipped to your door though air logistics.
ВИДЕО радне алата : –
FILL IN THE CONTACT FORM TO GET A QUOTE
COMBO COUNTERBORE DRILLS
Counterboring or spot facing of holes after drilling requires tool change. Changing the tool after drilling each hole, so that counterbore & drills are concentric, proves to be a long tedious & time consuming job.
We have developed a combination tool, which can drill and spot face/counterbore in the same go. No need of changing the tool each time. The tool comes with either HSS or carbide drills. The counterbore is done by standard indexable carbide inserts. This not only is a cheaper option but also a faster one.
Standard straight shank drills can be used in this tool. The drills are held in place by side lock holding arrangement, where as the tool holder can have either a straight shank or a taper shank. The customer may choose which shank he needs.
Контактирајте нас за информације о производу
Контакт Детаљи
- +91-80-28361767
- инфо@схеноиенгинееринг.цом
- +91-80-28361725
Продуцт
- Алат & Ножеви
- Глодање Специјализација
- Плоча Едге Миллинг, Плоча Кромкофрезерние Мацхине
- H BEAM, I BEAM MILLING, DRILLING & TAPPING MACHINE
- Плано Миллер, Дуплек, Вид под
- Milling Head with Facing attachment
- Мулти Англе Универсал Миллинг Прилог
- Ригхт Англе Миллинг Прилози
- Конвертовани Плано Миллерс
- Кит Планомиллинг Цонверсион
- Специјалне намене Плано Миллер
- РАМ Типе Миллинг & Досадно Глава
- Глодалице Ретрофит
- 3 Осе специјалне намене глодалица
- Мутли Шеф Миллинг СПМ
- Глодачких глава и миллинг хеад Опрема
- Специјалне намене машина
- Резању метала СПМ
- Специјалне намене машина
- 8 Station Rotary table based Drilling and Chamfering SPM
- Quadruple Head Milling SPM
- Two Station Four Spindle Turning SPM
- CNC 3 axes four spindle Profile Milling SPM
- Taper Milling SPM
- Triple Spindle Tapping SPM
- У Бушење и Боринг СПМ
- Drilling, Chamfering and Deburring SPM
- Con Rod Taper Milling SPM
- Con Rod Small End Bore Chamfering SPM
- Ротари У-Гате млинске СПМ
- 3 Axes, CNC, ID Trepanning, OD Turning & End Threading SPM
- Table Top Drilling Machine with Servo Positioning
- Double Head Slot Milling & Notch Milling SPM
- Double Head Slot Milling & Drilling SPM
- Дуплек глодалица - Економија верзија
- 2 осе ЦНЦ Мутли Тапер Турнинг СПМ
- Twin Station 8 Axes CNC Controlled Rough Turning SPM
- Quadruple Head Slot Milling & Slitting SPM
- Duplex Plunge Facing SPM
- H BEAM, I BEAM MILLING, DRILLING & TAPPING MACHINE
- Rotary Coordinate Drilling SPM
- Гун бушилица
- CNC BORING MILL- VMC, HMC and VTL rolled into one
- Супер Дорада Специал Пурпосе Мацхине
- Брушење специјалне намене машина
- Израда СПМ
- Резању метала СПМ
- Инситу Специјализација
- Portable CNC Mill
- Ин ситу Прирубничким Фацер, Портабле Радиал Планер & Полу Инситу Решење
- 3 ОСНА, ЦНЦ-МОБИЛЕ ГЛОДАЊЕ & НАВОЈ МАШИНА
- Portable 2 axes CNC wheel turning lathe
- ASTHRA – Hand driven flange facer
- Семи Инситу Решења
- Скуаре Фланге ин ситу Миллер
- Фланге Миллер
- Линија Боринг Специал Пурпосе Мацхине
- ЦНЦ машина
- Budget Vertical Machining Center
- 3 Осе ЦНЦ глодалица
- 3 Axes, CNC, ID Trepanning, OD Turning & End Threading SPM
- CNC Double Column Milling Machine
- CNC 3 axes four spindle Profile Milling SPM
- Portable 2 axes CNC wheel turning lathe
- 3 Axes Horizontal CNC machine
- Twin Station 8 Axes CNC Controlled Rough Turning SPM
- 2 осе ЦНЦ Мутли Тапер Турнинг СПМ
- ЦНЦ Плано Миллерс
- ЦНЦ Специал Пурпосе апарат за варење
- Fixtures for VMC and HMC
- Прилози
- Services
Преведите :-
Уређивање Превод