Counterbore Tools

Custom Manufactured to suite to your requirement.

ಕೌಂಟರ್ ರಂಧ್ರ ಉಪಕರಣಗಳು throwaway ಸೂಚ್ಯಂಕ ಸಾಧ್ಯವಾಗುತ್ತದೆ ಕಾರ್ಬೈಡ್ ಒಳಸೇರಿಸಿದನು ಪ್ರಯೋಜನಗಳಿವೆ. Counter bore tools are offered in any size with single, double or triple cutting edges based on the size. ಉಚಿತವಾಗಿ ಲಭ್ಯವಿರುವ ಗುಣಮಟ್ಟದ ಕಾರ್ಬೈಡ್ ಒಳಸೇರಿಸಿದನು ಬಳಸಲಾಗುತ್ತದೆ. ಪೈಲಟ್ಸ್ ಡಿಟ್ಯಾಚೇಬಲ್ ವಿಧಗಳು, ಕೌಂಟರ್ ಬೋರ್ಗಳ ಅದೇ ದಿಯಾ ಚಾಲಕರಿಗೆ ವಿವಿಧ ವ್ಯಾಸದ ಬಳಕೆಗೆ ಅವಕಾಶ ಇದು. ಈ ವೈಶಿಷ್ಟ್ಯವನ್ನು ಹಾನಿಗೊಳಗಾದ / ಶಕ್ತಿಗುಂದಿದ ಪೈಲಟ್ಗಳ ಸುಲಭದ ಬದಲಿ ಶಕ್ತಗೊಳಿಸುತ್ತದೆ. ಸುಲಭ ಚಿಪ್ ಹರಿವು ಸುಗಮಗೊಳಿಸುವ, ಚೆನ್ನಾಗಿ ವಿನ್ಯಾಸಗೊಂಡ gashes ಮತ್ತು ಪರಿಹಾರ ಉಪಕರಣ ಇಲ್ಲ ಒದಗಿಸಲಾಗುತ್ತದೆ.

ಲಕ್ಷಣವೆಂದರೆ & ಸ್ಪೆಕ್ಸ್:

• Custom manufactured as per your requirement. Mention the required hole and counter-bore diameter and we will manufacture it for you.
• Offered with tapered or straight shank.
• Standard ISO grade indexable carbide carbide inserts used. Replacement inserts can be bought from a local tool shop.
• Double or triple cutting edges provided so that feed per tooth can be increased for better speed and finish.
• Guide pilots used to guide the tool and provide sufficient rigidity while cutting.
• Guide pilots result in better concentricity.
• Guide pilots are detachable type. You can use one counterbore tool for multiple holes by changing the guide pilot.
• Detachable guide pilots can be easily replaced after getting worn out.
• Engineered relief, typical to flutes of a drill provided for chips to flow out.
• Manufacturing lead time of maximum 20 days.
• Shipped to your door though air logistics.

ಉಪಕರಣದ ಕೆಲಸ ವೀಡಿಯೊಗಳು : –

FILL IN THE CONTACT FORM TO GET A QUOTE

COMBO COUNTERBORE DRILLS

Counterboring or spot facing of holes after drilling requires tool change. Changing the tool after drilling each hole, so that counterbore & drills are concentric, proves to be a long tedious & time consuming job.

We have developed a combination tool, which can drill and spot face/counterbore in the same go. No need of changing the tool each time. The tool comes with either HSS or carbide drills. The counterbore is done by standard indexable carbide inserts. This not only is a cheaper option but also a faster one.

Standard straight shank drills can be used in this tool. The drills are held in place by side lock holding arrangement, where as the tool holder can have either a straight shank or a taper shank. The customer may choose which shank he needs.

OUR OTHER TOOLS RANGE: